10 Ton C Type Power Press Machine

300000 INR/Piece

Request to Call Back Send Inquiry

10 Ton C Type Power Press Machine Price And Quantity

Capacity	10 Ton
Brand	Jay Shree
Material	Mild Steel (MS)
Type	C Type
Hole In Bed	76 mm
Stroke Adjustment	6-50
Distance Bed to RAM	200 mm
Hole in RAM	25.4 mm
Length and Width of Ram Floor	230 x 150 mm
Weight	475 Kg
Length and Width of Bed	460 x 254 mm
Floor to Top of Bed	725 mm
Distance Bolster Plate to Ram	250 mm
Crank Shaft Diameter	60 mm
Stroke per min	80 per min

Standard Accessoreis :
Die Clamp, Pulley, Stud Driver, Tie Rood, Motor Stand, Oil Pump with manual System, Knock Out System.

Extra Accessories :
Electric Motor, V-Belt, Motor Starter, Table Drawer.

Other Details:

Frame : The frame is Fabricated from steel plates with heavy wide and full cross rib borders.
Clutch : The clutch is Round Key type with single and continuous strokes system. The key and Clutch ring is mode of EN 24 steel and its parts tempered.
Gears : Gears are of steel cost or fabricated. Gear teeth are generated by precision hobbing machine.
Crank Shaft : Crank shaft made of a very special alloy steel it moves very easily in Gun Metal buses.
Table & RAM : Table and ram made of high grade heavy duty cast iron & properly seasoned. They are perfectly aligned to other to obtain high accuracy & precision operation.
Lubrication : An efficient shot lubrication system has been provided for lubrication the sliding surfaces.